35
Using the optional Swing Head Kit “SJMK-500”
The optional control head extension cable “CT-132” is not required.
Freely change the angle of the control head up, down, left, or right.
z
Remove the control head from the transceiver body
To install the SJMK-500 Swing Head Kit, remove the control head from the transceiver
body.
Remove the control head
while pressing the knob
Remove the control cable
from the transceiver body
*No need to disconnect the
cable from the control head
z
Attach the SJMK-500 to the control head
Insert the pivot ball
into the socket.
Securely attach the pivot ball to the
control head (use a screwdriver as
illustrated).
Control Cable
Pass the control cable
through the hole
Connect the control cable
to the transceiver body
Align with the protrusion
on the right side of the radio
Press the left side until
a “click” is heard
Adjust the position of the
control head and secure
it with the set screw.
After inserting the pivot ball,
turn the screw to temporarily secure it
