60
Dual Receive Function
While receiving on the VFO or Memory Chanel, the transceiver checks for signals on the
HOME channel once every 5 seconds. When a signal is received on the HOME channel,
the priority scan pauses, allowing reception of the signal. When there is no signal on the
HOME channel for about 5 seconds, the transceiver will resume Priority Scan.
VFO or Memory channel
HOME channel
(Priority Channel)
The transceiver returns to the
previous frequency quickly and
continues to receive mode
when there is no signal.
When the transceiver receives a
signal on the frequency registered
to the priority memory channel,
dual reception stops and signal
receiver switches to priority
memory channel.
The transceiver monitors signals on the frequency registered to the
Priority HOME Channel, once approximately every 5 seconds.
z
Activating Priority Scan
1. Press and hold the
FUNC
knob.
2. Touch [
52 DUAL RCV MODE
].
Or rotate the
FUNC
knob to select [
52 DUAL RCV MODE
], then press the
FUNC
knob.
3. Rotate the
FUNC
knob to select [
PRIOITY SCAN
], then press the
FUNC
knob.
4. Press the
DIA
L knob,
SUB DIAL
knob or
PTT
switch to save the settings and re-
turn to normal operation.
z
Disable the Priority Scan function
To cancel Priority Scan, just repeat the above procedures, selecting “OFF” in step 3
above.
