Yaesu FTA-850L Скачать руководство пользователя

Страница: 3 / 96

INTRODUCTION

The YAESU

FTA-850L

is a compact, stylish, solid hand-held transceiver that provides transmit and receive

capability on the International Aircraft Communication Band (“COM” band: 118 to 136.975 MHz), and addition-

ally provides VOR and ILS navigation features on the “NAV” band (108 to 117.975 MHz).

It uses a 2.4 inch (49 x 37 mm) 320 x 240 dot, full-color TFT LCD to display a large amount of information in an

easy-to-understand format. With the DD (Dual frequency Display) function, two channels are displayed at the

top and bottom of the screen. The active channel can be switched instantly by simply pressing the ▲/▼keys.

A flight route navigation function operates with a highly sensitive built-in GPS unit. In addition, the standard

Bluetooth

unit enables hands-free operation using the optional SSM-BT10 or a commercially available Blue-

tooth

headset. An intuitive menu screen with icon display is adopted, and frequently used functions can be

activated immediately during operation.

The

FTA-850L

include N

OAA weather band monitoring and 400 memory channels. The channel configura

tions can be easily reprogrammed in minutes using the optional PC Programming Software and your PC, and

additionally provide positioning and navigation features realized by the internal GPS unit.
We recommend that you read this manual in its entirety, so as to understand the many features of the

FTA-850L

completely. Keep this manual handy, so you may use it for reference.

Note: The VOR, ILS, and GPS navigation features of the FTA-850L is for supplemental aids to naviga-

tion only, and are not intended to be a substitute for accurate (primary) VOR or landing service

equipment. You assume full responsibility for the use of the FTA-850L.

Congratulations!

You now have at your fingertips a valuable communications tool, a YAESU two-way radio! Rugged, reliable

and easy to use, your YAESU radio will keep you in constant touch with your friends and colleagues for years

to come, with negligible maintenance or down-time.

Please take a few minutes to read this manual carefully. The information presented here will allow you to

derive maximum performance from your radio, in case questions arise later on.

We’re glad you joined the YAESU team. YAESU products cover the entire spectrum of radio communications

applications, and our worldwide support network is here to serve you. Let us help you get your message across.

Содержание FTA-850L

































































































Результаты поиска

Содержание FTA-850L

Отзывы:

Похожие инструкции для FTA-850L

Бренды по названию

Популярные бренды

Yaesu FTA-850L, Руководство по эксплуатации

Результаты поиска

Содержание FTA-850L

Отзывы:

Похожие инструкции для FTA-850L

Бренды по названию

Популярные бренды