60
Navigation screen
N 3
33
15
21
6
30
12
24
E
W
S
Compass rose
Course indicator
Waypoint indicator
Tag name of the next waypoint or destination
DST (distance)
COG (course over ground)
SOG (speed over ground)
ALT (altitude)
•
The compass rose rotates to display the travelling
course up.
•
Upon arriving at the destination, a bell will sound,
the navigation will end, and the compass screen
will continue to display.
•
For route navigation, when arriving at a waypoint,
a beep will sound and the next waypoint will
automatically be displayed.
•
On the navigation screen, the frequency or memory
channel may be changed by turning the
DAIL
knob.
•
If the [
ENT
] key is pressed during navigation,
the flip-flop in COMM mode or the memory list in
memory mode will be displayed temporarily while
the navigation continues. Flip-flops or memory
channels may be selected by pressing the [▲] / [▼]
keys. About 15 seconds after pressing the [
BACk
]
key, or stopping the operation, the navigation
screen will be returned.
Notes:
•
Waypoints and destination distances can be set in
the GPS Setup “
Arrival Range
•
When “
REC F
) of GPS
Setup is set to “
ON
”, the transceiver frequency is
automatically saved in the next waypoint where the
frequency information is saved. It will be changed
to the frequency you are using.
z
Select a destination or route from the history
Start navigation by selecting from the memory or
route history previously used for navigation.
1. Press the [▲] / [▼] keys to
select “
History
” and press
the [
ENT
] key.
Waypoints appear at the
top of the list, followed by
routes.
