58
Set mode no. / item
Description
Selectable options
(Options in bold are the default settings)
4 MEMORY PROTECT
Set whether to allow or prohibit
memory channel registration.
ON /
OFF
5 MEMORY SKIP
Set for skip memory / specify memory.
OFF
/ SKIP / SELECT
6 MEMORY WRITE
Set the automatic channel number
increment when registering to a
memory channel.
NEXT
/ LOWER
SIGNALING
1 BELL
Set the bell function settings.
SELECT:
OFF
/ BELL
RINGER:
1time
to 20times / CONTI
2 DCS CODE
Set the DCS code.
DCS 023
to DCS 754
3 DCS INVERSION
Select a combination of DCS inversion
codes in terms of communication
direction.
RX (Receive):
NORMAL (Homeomorphic)
/
INVERT (Inversion) / BOTH (Both Phase)
TX (Transmission):
NORMAL
(Homeomorphic)
/ INVERT (Inversion)
4 DTMF MODE
Set the transmission of DTMF code
registered to a DTMF memory
channel, DTMF code transmission
delay time, and DTMF code
transmission speed.
MODE:
MANUAL
/ AUTO
DELAY: 50ms / 250ms /
450ms
/ 750ms /
1000ms
SPEED:
50ms
/ 100ms
5 DTMF MEMORY
Set the DTMF auto dialer channel
and code (16 characters).
CH1
to CH10
6 PAGER
Turn the pager answerback Function
ON/OFF, and specify a personal code
(transmit/receive).
ANS-BACK: ON /
OFF
CODE-RX: 01 to 50 for each,
05 47
CODE-TX: 01 to 50 for each,
05 47
7 PR FREQUENCY
Set a non-communication squelch.
300Hz to 3000Hz
1600Hz
8 SQL LEVEL
Select a squelch level.
LEVEL 0 to LEVEL15
LEVEL 1
LEVEL 0 to LEVEL 8
LEVEL 1
(AM radio)
LEVEL 0 to LEVEL 8
LEVEL 2
(FM radio)
9 SQL S-METER
Select an S-Meter squelch level.
OFF
/ LEVEL1 to LEVEL10
10 SQL EXPANTION
Set a squelch type separately for
Receive and transmit.
ON /
OFF
11 SQL TYPE
Select a squelch type.
OFF
/ TONE / TONE SQL / DCS /
REV TONE / PR FREQ / PAGER / (D CD) /
(TONE-DCS) / (D CD-TONE SQL)
* The options in the parentheses are
available when the SQL expansion is ON.
12 TONE SQL FREQ
Set a tone frequency.
67.0Hz to 254.1Hz
100.0Hz
13 TONE SEARCH
Set the audio output during tone
search. Turn the muting function on/
off and select a tone search speed.
MUTE:
ON
/ OFF
SPEED:
FAST
/ SLOW
14 WX ALEAT
Enables/Disables the Weather Alert
Feature.
ON /
OFF
SCAN
1 DW TIME
Set the priority memory channel
monitoring interval.
0.1sec to 10sec
5.0sec
2 SCAN LAMP
Set whether or not to light up the scan
lamp when scanning stops.
ON
/ OFF
3 SCAN RE-START
Set the scanning restart time.
0.1sec to 10sec
2.0sec
4 SCAN RESUME
Configure the scan stop mode
settings.
SCAN:
BUSY / HOLD / 2.0sec to 10sec
5.0sec
DW: BUSY /
HOLD
/ 2.0sec to 10.0sec
5 SCAN WIDTH
Set the scan mode operation.
VFO:
ALL
/ BAND
MEMORY:
ALL CH
/ BAND
BANK LINK:
ON
/ OFF
6 PRIORITY REVERT
Turn the “Priority Channel Revert”
feature ON or OFF during Dual
Receive.
ON /
OFF
