57
Tables of Set Mode Operations
Set mode no. / item
Description
Selectable options
(Options in bold are the default settings)
DISPLAY
1 TARGET LOCATION
Set what to display using the smart
navigation function.
COMPASS
/ NUMERIC
2 COMPASS
Set the compass display of the smart
navigation function.
HEADING UP
/ NORTH UP
3 BAND SCOPE
Set the number of search channels
for the band scope function.
19ch /
39ch
/ 79ch
4 LAMP
Set the duration time of the backlight
and keys to be lit.
KEY: OFF / 2 to 180 / CONTINUOUS
KEY
30 sec
SAVE: ON /
OFF
5 LANGUAGE
Switch between Japanese/English for
the menus and Set mode, etc.
ENGLISH
/ JAPANESE
6 LCD DIMMER
Set the brightness level of the LCD
backlight and numeric keypad light.
LEVEL1 to
LEVEL6
7 OPENING MESSAGE
Set the opening message type.
OFF /
DC
/ MESSAGE
8 SENSOR INFO
Display the voltage.
DC
9 SOFTWARE VERSION Display the software version.
Main / Sub / DSP
TX/RX
1 MODE
1 ANTENNA ATT
Switch the attenuator between ON or
OFF.
ON /
OFF
2 FM BANDWIDTH
Set the FM transmission modulation
level.
WIDE
/ NARROW
3 RX MODE
Select the receive mode.
AUTO
/ FM / AM
2 DIGITAL
1 DIGITAL POPUP
Set the POP UP time.
OFF / BAND2s / BAND4s / BAND6s /
BAND8s /
BAND10s
/ BAND20s /
BAND30s / BAND60s / BAND CONTINUE
2 LOCATION SERVICE Set whether or not to display your
current location in digital mode.
ON
/ OFF
3 STANDBY BEEP
Switch the standby beep function
between ON or OFF.
ON
/ OFF
4 DIGITAL VW
Turn the VW mode selection ON or
OFF.
OFF
/ ON
3 AUDIO
1 MIC GAIN
Adjust the microphone gain level.
LEVEL1 to LEVEL9
LEVEL5
2 MUTE
Set the muting level on the non
operating band side when a signal is
received on the operating band side.
OFF
/ MUTE 30% / MUTE 50% /
MUTE 100%
3 RX AF DUAL
Set the resume time of radio reception
in the AF Dual mode.
Transmit and receive 1 second to
10 seconds, Fixed, or transmission 1 second
to 10 seconds.
Transmit and receive 2 seconds
4 VOX
VOX function setting.
VOX:
OFF
/ LOW / HIGH
DELAY:
0.5
/ 1.0 / 1.5 / 2.0 / 2.5 / 3.0 (sec)
5 RECORDING
Voice record function setting.
BAND:
A
/ B / A+B
MIC: ON /
OFF
MEMORY
1 BANK LINK
Set the memory bank link.
BANK1 to BANK24
BANK LINK ON /
OFF
2 BANK NAME
Assign a name to each memory bank. BANK1 to BANK24
3 MEMORY NAME
Input the memory channel tag.
Up to 16 letters
