75
Set Mode: SCAN Menu Operations
1 Setting the Surveillance Interval Time for Priority Channels
DW INTERVAL TIME Function
When the dual receive function is active, the interval time at which the priority channel is
monitored can be set.
1. Press and hold the [
DISP
] key, and then touch [
SCAN
].
2. Rotate the
DIAL
knob, then touch [
1 DW TIME
].
3. Rotate the
DIAL
knob to select the monitoring interval from 0.1 SEC to 10 SEC.
Remark
The default setting: 5.0 seconds
2 Setting the Illumination On/Off When Scanning Stops
LAMP Function
Set whether or not the LCD backlight is turned on when a signal is received during scan-
ning.
1. Press and hold the [
DISP
] key, and then touch [
SCAN
].
2. Rotate the
DIAL
knob, then touch [
2 SCAN LAMP
].
3. Rotate the
DIAL
knob to select the desired setting.
ON
The LCD backlight will illuminate when a signal is received.
OFF
The LCD backlight will not illuminate when a signal is received.
Remark
The default setting: ON
3 Setting the Time to Resume Scanning SCAN RE-START Function
Set the time interval to resuming scanning after a received signal ends during scanning.
1. Press and hold the [
DISP
] key, and then touch [
SCAN
].
2. Rotate the
DIAL
knob, then touch [
3 SCAN RE-START
].
3. Rotate the
DIAL
knob to select the time to resume scanning from 0.1 SEC to 10 SEC.
Remark
The default setting: 2.0 seconds
4 Selecting a Receive Operation When Scanning Stops
Touch [
4 SCAN RESUME
] to set the receive operation for when scanning stops.
For details, see “Setting the Receive Operation When Scanning Stops” on page 37.
5 Setting the Scanning Range
You can set the frequency range for scanning in VFO mode and Memory mode.
1. Press and hold the [
DISP
] key, and then touch [
SCAN
].
2. Touch [
5 SCAN WIDTH
].
3. Rotate the
DIAL
knob to select [
VFO
], then press the [
DISP
] key.
4. Rotate the
DIAL
knob to select the desired setting referring to the table below.
ALL
Scans all bands from the current frequency within the 1.8 MHz to 999
MHz range.
BAND
Starting with the current frequency, scans within the current band.
5. Press the [
BACK
] key.
6. Rotate the
DIAL
knob to select [
MEMORY
], then press the [
DISP
] key.
