78
OFF
No confirmation sound is emitted when a band edge/CH1 is encoun-
tered.
ON
Emits the confirmation sound when a band edge/CH1 is encountered.
Remark
The default setting: OFF
4 Setting the BEEP volume
Set the volume of the beep sound.
1. Press and hold the [
DISP
] key, and then touch [
CONFIG
].
2. Touch [
4 BEEP LEVEL
].
3. Rotate the
DIAL
knob to select the desired setting.
HIGH
Volume level set to HIGH
LOW
Volume level set to LOW
Remark
The default setting: HIGH
5 Turning off the BUSY Indicator
When listening to the radio continuously or to extend the remaining battery operating
time, turn off the BUSY indicator to save battery power consumption.
1. Press and hold the [
DISP
] key, and then touch [
CONFIG
].
2. Touch [
5 BUSY LED
].
3. Rotate the
DIAL
knob to select “A BAND”, “B BAND” or “RADIO”, then press the
[
DISP
] key.
4. Rotate the
DIAL
knob to select the desired setting.
ON
Turns the BUSY indicator ON.
OFF
Turns the BUSY indicator OFF.
Remark
The default setting: ON
5. Press the [
BACK
] key.
6. To change the setting for other bands, repeat steps 3 to 5.
6 Setting the Clock Shift for the Micro Computer Clock Type Function
Set the micro computer Clock Shift function may be activated to eliminate an internally
generated spurious high frequency signal. Select [A] for normal use.
1. Press and hold the [
DISP
] key, and then touch [
CONFIG
].
2. Touch [
6 CLOCK TYPE
].
3. Rotate the
DIAL
knob to select the desired setting.
A
Automatically switches the Clock Shift function between ON & OFF.
B
Activates the Clock Shift function constantly.
Remark
The default setting: A
