27
Changing the Transmit Power Level
1. Touch [
F MW
], then touch [
TX PWR
].
If [
TX PWR
] is not displayed, touch [
BACK ←
] to dis-
play [
TX PWR
] and then touch it.
2. Rotate the
DIAL
knob to select one of the following
transmit power levels.
TX PO Level
PO Meter
HIGH (5W)*
LOW3 (2.5W)
LOW2 (1W)
LOW1 (0.3W)
*The default setting. When the optional alkaline battery case (FBA-39) is used, only LOW2 (about
0.9W) and LOW1 (about 0.3W) can be selected.
3. Press the
PTT
switch to save the setting and return to the normal operation.
The transmission power level may be set separately for each frequency band.
Locking the Keys and DIAL knob
1. Press the Power (Lock) switch, “
LOCK
” is shown on
the display for one second, the “ ” icon appears on
the LCD, and then the keys and
DIAL
knob are
locked.
•
The keys, the
DIAL
knob, and the
PTT
switch may be selected to be locked using Set
Mode [
CONFIG
] → [
9 LOCK
]. The default setting is the “
KEY&DIAL
” (the keys and the
DIAL
knob are locked).
•
The
MONI/T-CALL
switch,
SQL
switch and the
VOL
knob cannot be locked.
2. Press the POWER (Lock) switch again, “
UNLOCK
” will be shown on the Display and
the keys and the
DIAL
knob are unlocked.
