Xyratex RS-1600-FC-FFX2 Скачать руководство пользователя страница 16

Страница: 16 / 82

RS-1600-FC-FFX2 User Guide

xiv

2.0

October 29, 2002

Chapter 4

Table 4-2 amended:

• “12C” changed to “I2C” in column 8, row 8.

Section 4.8.1, Warning added:

Warning

Do not remove covers from the power supply
unit. Danger of electric shock inside. Return
the PSU to your supplier for repair.

Section 4.8.3.1, note added and step 1 revised as follows:

Note

As there should always be two LRC I/O modules
installed, you can continue working while replacing
the faulty module.

Ensure that you correctly identify the faulty module

from the two modules installed.

Section 4.8.4: step 1 deleted.

Section 4.8.5 renumbered to 4.8.6 and new section 4.8.5 inserted,

“Battery Replacement”.

Section 4.9: Battery added to spare parts list.

Glossary

Definitions of “Module” and “ESI/Ops panel” revised to reflect the fact

that the ESI/Ops panel is an integral part of the Enclosure and not a

removable module.

3.0

February 24, 2003 Preface

Safety

Additional bullet point added:

• A faulty Power Supply/Cooling module must be replaced with a fully

operational module within 24 hours.

Rack Safety:

Bullet points 1 & 3 replaced by new bullet 1:

• The rack design should incorporate stabilizing features suitable to

prevent the rack from tipping or being pushed over during

installation or in normal use.

New bullet 3:

technical specification changed to user guide.

Bullet point 8:

UL 1950 changed to UL 60950.

Version

Date

Description of Change

Содержание RS-1600-FC-FFX2



















































































Результаты поиска

Содержание RS-1600-FC-FFX2

Отзывы:

Похожие инструкции для RS-1600-FC-FFX2

Бренды по названию

Популярные бренды

Xyratex RS-1600-FC-FFX2, Инструкция по установке и эксплуатации

Результаты поиска

Содержание RS-1600-FC-FFX2

Отзывы:

Похожие инструкции для RS-1600-FC-FFX2

Бренды по названию

Популярные бренды