Xyratex RS-1600-FC-FFX2, Инструкция по установке и эксплуатации

Страница: 15 / 82

Preface
xiii
2.0 October 29, 2002 Sections 1.5.3 and 1,54 revised:
• AC and DC PSU specs amended
New Section 1.5.5 inserted:
• PSU Safety and EMC Compliance, additional information Inserted.
Section 1.5.10 revised:
• Drive power dissipation was 22 Watts maximum, is 18.7 Watts
maximum.
Section 1.5.11: “MBTF” corrected to “MTBF”
Chapter 2
Section 2.4, new para and warning inserted:
• “Install in the rear of the enclosure in positions 1 and 5.”
Warning Do not remove covers from the power supply
unit. Danger of electric shock inside. Return
the PSU to your supplier for repair.
Section 2.4.1, Warning added:
Warning Do not mix PSU/Cooling modules of different
types.
Section 2.4.2, note added:
Important PSU2 (RH rear bay) must be fitted “upside-
down” as shown in
Figure 2–1 .
Sections 2.5, 2.5.1 and 2.6: para titles: FC-FFX2-FCAL changed to
FFX2-FCAL
Section 2.5.4: XDAM version revised from 1.2.7 to 1.3.4
Figure 2-11 “Hardware Configuration” revised.
Figure 2-12 “Twin Host Redundant LRC Expansion Configuration”
replaced with new illustration.
Table 2-2:
• Switch 1 settings for RAID 0 and RAID 1 changed from “N/A” to “0”
and “1” respectively.
• Note added:
Important There must be a drive present in Bay 1/1 or 4/4
to enable SES Communications to operate.
Installing drives in both of these bays will
provide redundant SES communication paths.
Chapter 3
Table 3-2 amended:
• “12C” changed to “I2C” in column 8, row 8.
Version Date Description of Change