Getting Started
X Y P L E X M A X S E R V E R 1 6 0 0
TERMINAL SERVER
1 2 3 4 5 6 7 8 9 1 0 1 1 1 2 1 3 1 4 1 5 1 6
RUN LAN CONSOLE
C A R D
X
Ports 1 - 16
-- These lights indicate port activity.
Flashing = activity associated with port.
ON = port connection established.
OFF = no port connection established.
Reset switch
-- Press once to put the unit in reset state.
Press again to re-initialize the unit.
CONSOLE light
-- ON when someone is logged on to the
unit's console port via the network. Flashes if permanent
parameter changes have not yet been stored. (Do not power
off the MAXserver 1600 while this light is flashing.)
LAN light
-- Flashes when the unit receives Ethernet
packets. (OFF when not connected to network, or network
is faulty.)
RUN light
-- ON when unit is reset; flashes rapidly when
unit executes firmware code; flashes slowly when software
is loaded (RUN state).
CARD light
-- ON when Memory card is being accessed. Do
not remove the card or power off the unit while this light
is ON.
Memory Card slot
Eject Button
Figure 2-3. MAXserver 1600/1608 Front Panel
16
0590
