pHotoFlex
®
Turb
Operation
43
ba75976e07
09/2021
4.5.8 Programs
Displaying
program data
You can view the most important data of all methods.
The method data is ordered according to the program number.
Updating
programs
Go to
www.WTW.com
to always find the latest software version with the new-
est programs and method data for your pHotoFlex
®
Turb (see F
).
User-defined pro-
grams
User-defined programs (methods) can be stored under program numbers be-
tween 900 and 999. You can store up to 100 user-defined programs (see
section 4.13).
4.5.9
Analysis timer
Measuring according to analysis instructions often means there are waiting
periods between the individual steps.
These waiting periods (time intervals) are stored in the instrument with the
If
i
Calibration error!
was displayed as the calibration result, a
note automatically reminds you of another zero adjustment be-
fore the next measurement.
Measuring is not possible without a valid zero adjustment.
8 Confirm the result with
<START/ENTER>
.
The zero adjustment is completed.
The meter is ready to measure.
1 Open the menu
Configuration
/
Photometry
/
Programs
.
The display shows the most important data of the selected program.
This data is also to be found in the photometry analysis manual
in the overview of the test sets and in the individual analysis spec-
ifications for the test sets.
83: A6/25 MC
0.20 - 8.00 mg/l
NH4-N
16 mm
i
Scroll with
▲
▼
Programs
Program number, test, code
Measuring range with unit
Citation form
Diameter of the cell
