Operation
pHotoFlex
®
Turb
24
ba75976e07
09/2021
4.3.4 Example 2 on navigation: Setting the date and time
The meter has a clock with a date function. The date and time are indicated
in the status line of the measured value display. When storing measured val-
ues and calibrating, the current date and time are automatically stored as
well.
Numerals are generally entered via the number keys.
The correct setting of the date and time and date format is important for the
following functions and displays:
Current date and time
Calibration date
Identification of stored measured values.
Therefore, check the time at regular intervals.
Setting the date,
time and date
format
The date format can be switched from the display of day, month, year
(
dd.mm.yy
) to the display of month, day, year (
mm/dd/yy
or
mm.dd.yy
).
After a fall of the supply voltage (empty batteries, empty battery
pack), the date and time are reset to 01.01.2003 00, 00:00 hours.
1 In the measured value display:
Open the
Configuration
menu with
<MENU>
.
The instrument is in the configuration mode.
2 Select and confirm the
System
/
Continue ...
/
Date/time
menu with
<
V
> <
W
>
and
<START/ENTER>
.
3 Select and confirm the
Time
menu with
<
V
> <
W
>
and
<START/EN-
TER>
.
A display for the entry of numerals with the number keys opens up.
Time
:
14:53:40
Date
:
30.10.03
Date format
:
dd.mm.yy
Date/time
