Xylem WTW pHotoFlex Turb, Руководство по эксплуатации

Страница: 32 / 104

Operation pHotoFlex
®
Turb
32
ba75976e07 09/2021
substance to be determined into the form that is suitable for measurement
and at the same time exclude disturbing factors.
Pretreatment of the sample is described in the analysis specification.
In a simple case, pretreatment can be to dissolve a solid substance in water;
it can, however, also include chemical conversions, e. g. a digestion.
The chemicals required in the analysis specification are available as test
sets.
Methods and the corresponding method data for many test sets are stored as
programs in the pHotoFlex
®
Turb. A program number is assigned to each
program.
The stored method data are loaded when the program number is entered or
read in with the aid of a bar code reader.
You can look up an overview of the available methods in the photometry anal-
ysis manual and display it on the screen of the pHotoFlex
®
Turb (see
section 4.5.8).
You can measure the following parameters with the pHotoFlex
®
Turb:

Concentration
[mg/l]

% Transmission
[]

Absorbance
[]
Preparatory
activities
Perform the following preparatory activities when you want to measure:
Suitable analysis specifications for test sets can be found in the
photometry analysis manual (on CD-ROM).
There you will also find further instructions on handling chemicals
and on how to proceed when applying the analysis specifications.
1 Clean the exterior of the cells before filling them with sample and also
before measuring if necessary (see section 5.2.2).
The cells must be absolutely clean and free of scratches.
2 For measurement, place the pHotoFlex
®
Turb on a horizontal sur-
face.