Xylem wtw MIQ/IDS, Руководство по эксплуатации

Страница: 14 / 62

Installation MIQ/IDS
14
ba77277d01 01/2024
3.7 Connecting the IDS sensor
IDS sensors The connected IDS sensors are supplied
with power via the MIQ/IDS module (see
section 11.2).
1. Connect the IDS plug of the sensor cable to an IDS interface of the MIQ/
IDS module.
The sensor data are displayed on the IQ S
ENSOR
N
ET
terminal in the
measured value display.
figure 3-1 Display of a sensor in the measured value display (example: pH sensor)
For functions, settings and further information on the connected sensor,
see the following sections in the operating manual.
IDS sensors are displayed in the IQ S
ENSOR
N
ET
with a group name
for the sensor type (e.g. "IDS pH").
The series number may be shortened.
The original sensor name and the original series number can be
displayed in the status info of the sensor int he menu
Einstellungen/
Settings/Service/List of all components
(see IQ S
ENSOR
N
ET
system
operating manual).
Component Power supply