Xylem WTW DIQ/S 281, Руководство по эксплуатации

Страница: 72 / 132

Settings/setup DIQ/S 281
72
ba77244d01 08/2020
5.3.4 Access to the DIQ/S 28X with active access control
5.4 Settings for sensors
Sensor settings include the measured parameter, measuring range and, if
necessary, compensations.
Sensor settings The following diagram shows the operating steps to call up the sensor setting
4 Press
<

>
to select an authorization level and confirm with
<OK>
.
5 Using
<

>
, select the menu item,
Save access code on USB
memory
and confirm with
<OK>
.
The password for the selected authorization level is saved to the USB
memory device.
 Administrator access through entering the password:
– After 10 minutes without key-pressing, the highest protection
level is automatically activated.
– Select the menu
Display/Options
/
Viewing only
.
The highest level of protection is activated.
 Administrator access through connecting the electronic key: The
protection is restored by disconnecting the electronic key