Xylem WTW DIQ/S 281, Руководство по эксплуатации

Страница: 53 / 132

DIQ/S 281 Operation
53
ba77244d01 08/2020
4.4 Display of current measured values
The measured value is displayed numerically and as a rod.
4.5 Messages and log book
The DIQ/S 28X Universal Transmitter continuously monitors the status of the
entire system. If the DIQ/S 28X identifies any system changes, a message
appears. New messages can be recognized by the flashing information symbol
or error symbol on the display.
All messages are recorded in the log book.
4.5.1 Message types
The system differentiates two types of messages:
 Error
h
Indicates a critical status in the system or an individual system component
that requires immediate action.
In the case of new error messages, the error symbol flashes on the display.
 Information
i
Information that does not require immediate action.
In the case of new information, the info symbol flashes on the display.
Further details on access control (see section 5.3)
figure 4-8 Measured value