Xylem WTW DIQ/S 281, Руководство по эксплуатации

Страница: 71 / 132

DIQ/S 281 Settings/setup
71
ba77244d01 08/2020
Switching off the
instrument block
5.3.3 Electronic key
The administrator can simplify access to the DIQ/S 28X by saving the password
to USB memory. The USB memory thereby becomes an electronic key.
When the electronic key is connected to the DIQ/S 28X, the user right stored
there with the relevant password is automatically read out. The user of the elec-
tronic key is logged on to the system with his user right without any further pass-
word prompt.
When the electronic key is disconnected, the DIQ/S 28X automatically switches
to the lowest user right.
Passwords for different IQ S
ENSOR
N
ET
systems can be saved to every elec-
tronic key.
For each IQ S
ENSOR
N
ET
system only one password can be saved to each elec-
tronic key.
Saving a password
to an electronic
key
4 Using
<

>
, select
OK
and confirm with
<OK>
.
The settings are adopted.
The
Access control
dialog window is still open.
The current passwords are visible.
1 Press
<OK>
to open the
Display/Options
/
Change user rights
menu.
The password query is displayed.
2 Enter and confirm the administrator password with
<

>
and
<OK>
.
3 Open the
Einstellungen/Settings
menu with
<S>
.
Deactivate the access control.
Take over the setting.
1 Connect the USB memory to the USB-A interface.
Administrator rights are required when the access control is active.
2 Open the
Einstellungen/Settings
menu with
<S>
.
3 Using
<

>
and
<OK>
, select and confirm the menu item,
Access control
.
The
Access control
dialog window opens.