background image

62 

 

7  Guarantee 

We provide guarantee for the device described for two years from the date of purchase. This guarantee 
covers manufacturing faults being discovered within the mentioned period of two years. Claim under 
guarantee covers only the restoration of functionality, not any further claim for damages or financial loss. 
Improper handling/use or illegitimate opening of the device results in loss of the guarantee rights.  
The guarantee does not cover wear parts, as lobes, cylinders, valves and pipes including the thread 
connections and the titration tips. The breach of glass parts is also excluded. To ascertain the guarantee 
liability, please return the instrument and proof of purchase together with the date of purchase freight paid 
or prepaid. 
 

8  Storage and transport 

If the ViscoClock 

plus

 is intended to be stored intermediately or transported again, the original packaging 

will provide the best conditions to protect the devices. However, in many cases, this packaging is no 
longer available, so that a similar packaging must be created. Sealing of the unit in foil is advantageous 
here.  The devices should be stored in a room with a temperature b  10 and +  40°C and the 
(relative) humidity should not exceed 70% (rel.).  
 

9  Recycling and disposal 

Please observe the applicable local or national regulations concerning  the  disposal of “waste 
electrical and electronic equipment”. 

 

The ViscoClock 

plus

 and his packaging are manufactured as far as possible from materials which can be 

disposed of environmental-friendly and recycled in a technically appropriate manner. If you have  any 
question regarding disposal, please contact the service (see backside of this manual). 
 

 The main printed board carries a lithium battery. Batteries should not to be disposed of with the normal 

domestic waste. They will be taken back and recycled or disposed of properly by the manufacturer at no 
cost. 
 

10  Accessories and Spare Parts 

10.1  Accessories   

VZ 6550 

Manual pump set "push“ 

VZ 6554 

Manual pump set "suction“ 

TZ 1858  

All voltage plug power supply 100 - 240 V ~ 

 

9 V / DC, 550 mA 

TZ 1852 

Primary adapter for TZ 1858, for UK 

TZ 1854 

Primary adapter for TZ 1858, for Australia 

TZ 3863 

Thermal printer 

TZ 3864 

Printer paper for TZ 3863, very high durability (5 rolls) 

VZ 6570 

USB OTG adapter cable (mini B plug on USB A socket) 

CT 72/… 

Transparent thermostats of the CT 72 series (CT 72/P, CT 72/2, CT72/4) 

 

10.2  Spare parts  

VZ 6551 

Silicone plugs (8), 5 ea. 

VZ 6572 

Silicone cap (10) for ventilation tube, including connection hose, 1 ea. 
alternatively:  
VZ 5101 Silicone cap () for ventilation tube, including connection hose, 1 ea. 

VZ 6556 

Replacement glass tube (28) for manual pump VZ 6550 or VZ 6554 

Содержание SI Analytics ViscoClock plus





































Отзывы: