en
en
en
en
31
2. PROGRAMMING - SET UP
PROGRAMMING CAN BE P
PROGRAMMING CAN BE P
PROGRAMMING CAN BE P
PROGRAMMING CAN BE PERFORMED ONLY WITH T
ERFORMED ONLY WITH T
ERFORMED ONLY WITH T
ERFORMED ONLY WITH THE ENGINE OFF AND TH
HE ENGINE OFF AND TH
HE ENGINE OFF AND TH
HE ENGINE OFF AND THE
E
E
E
“KEY
“KEY
“KEY
“KEY----OPERATED SELECTOR SW
OPERATED SELECTOR SW
OPERATED SELECTOR SW
OPERATED SELECTOR SWITCH IN THE MAN POSI
ITCH IN THE MAN POSI
ITCH IN THE MAN POSI
ITCH IN THE MAN POSITION!”
TION!”
TION!”
TION!”
Read the operating instructions carefully before you start programming, so as to avoid
Read the operating instructions carefully before you start programming, so as to avoid
Read the operating instructions carefully before you start programming, so as to avoid
Read the operating instructions carefully before you start programming, so as to avoid
entering incorrect settings t
entering incorrect settings t
entering incorrect settings t
entering incorrect settings that could cause malfunctions.
hat could cause malfunctions.
hat could cause malfunctions.
hat could cause malfunctions.
Any modification operations may be performed by qualified technicians only!
Any modification operations may be performed by qualified technicians only!
Any modification operations may be performed by qualified technicians only!
Any modification operations may be performed by qualified technicians only!
Set the selector switch to the “MAN” position.
Power the electric panel, then press and hold down the PROG / RESET / ENTER pushbutton
for longer than 5 seconds, the cursor will start blinking.
1 parameter
2 value
Use the UP key to increase the value
Use the DOWN key to decrease the value
Use the enter key to confirm
Password value : 006
Password value : 006
Password value : 006
Password value : 006
HOW TO SET THE FUNCTIONS
HOW TO SET THE FUNCTIONS
HOW TO SET THE FUNCTIONS
HOW TO SET THE FUNCTIONS
Use the UP and DOWN keys to select the desired parameter
Use the ENTER key to access the programming mode (the cursor will start blinking)
Use the UP and DOWN keys to modify the value
Press the PROG/RESET/ENTER key to confirm the value
Proceed as described above for each function you wish t
Proceed as described above for each function you wish t
Proceed as described above for each function you wish t
Proceed as described above for each function you wish to set
o set
o set
o set
It is possible to exit the access or the SET-UP program at any time by turning the key-
operated selector switch to the “0” or “AUTO” position!
