XSD27ZS Operating Manual
3
SAFETY CAUTION
WARNING: User shall be reminded to avoid the risk including potential deaths or severe
injuries.
1. Please refer to the ambient requirement for equipment when installation; do not install this
equipment in the environment with too much moisture, dust and smoke dust (which may result
in fire or electric shock).
2. In case that this equipment emits abnormal smell or smoke, please immediately stop it, shut
off the power and contact the supplier (otherwise this equipment may result in fire or electric
shock).
3. During cleaning this equipment do not directly spray water on any part of this equipment
(which may result fire or electric shock).
4. Please do not place this equipment near a heat source (otherwise, a fire risk is potential).
5. It is forbidden to store, install and use this product in danger areas with inflammable or
explosive substances.
NOTICE: Please carefully read the instruction book before installation.
1. During transportation, storage and installation, heavy load, violent vibration and immersion
shall be prevented to avoid the damage of the equipment.
2. Before moving or re-installing this equipment, please be sure that the power is shut off.
3. This equipment shall be installed at the site with good ventilation.
4. In case that this equipment does not work normally, please contact supplier and do not
disassemble or reform this equipment (Xvision will not take any responsibility for the problem
resulted from unapproved reformation or repair).
5. During cleaning the surfaces of this equipment, do not use chemical cleaning agent which
may result in the deformation of equipment surface or damage of covering layer.
6. It is important that the dome camera is not left in a position where the camera is pointing
directly at the sun or other extremely bright light source. This may result in CCD damage and
poor image quality.
XSD27ZS - Operating Manual
