XSD27ZS Operating Manual
16
4. Disarming Time (Hours: Minutes)
5. Presetting Scanning: Linkage preset location scanning No. (0-4)
0 means the scanning without linking presetting
6. Pattern Scanning: Linkage pattern scanning No. (04)
0 means the pattern scanning without linking
7. Area Scanning: Linkage area scanning No. (0-4)
0 means the area scanning without linking
8. Alarm Output: On and Off
9. Exit: Exit the submenu without saving the modification
10. Save: Save the settings and exit submenu
Cancel: Cancel and exit the sub menu
Enter: Perform the defaulted setting and exit the sub menu
3.3.9 DEFAULT SETTING
4
TROUBLESHOOTING
Phenomenon
Possible Cause
Countermeasures
Power damage or insufficient
power
Change it
Error connection of power
line
Faults of engineering route
Mechanical fault
Inclined camera
Insufficient power supply
Normal self-inspection but no
image
Error video lines
Poor video line connection
Camera damage
Change it
No action or image after
electrifying
Correct it
Eliminate it
Inspect it
Adjust it
Correct it
Eliminate it
Abnormal self-inspection;
image exists but with motor
noise
Change the power complying with
the requirements and put the
switch power near the dome
XSD27ZS - Operating Manual
4.1
TROUBLE SHOOTING TABLE
