11
103+CALL
Switching linear scanning speed
(fast, slow and
medium)
105+CALL
Starting digital zoom
106+CALL
Closing digital zoom
107+CALL
、
108+CALL
109+CALL
Starting communication fault indication
110+CALL
Closing communication fault indication
3.2
KEYBOARD OPERATION
Set preset location scan: Preset location scan routine can be set using 2 ways:
See ‘Menu set -> Scan Set’
There are a total of 4 preset location routines and 32 preset locations that can be set. The
40th and 43rd preset locations are in turn used to set and call the 1st and 4th preset
location routines:
1) Execute the command of setting 40th preset location to enter the set status
2) Call the desired set option to the preset location in routines, such as the first, the second,
etc.
3) Wait a desired time to stay (the interval time between two location), and do not
conduct any operation.
4) Call next routine that you want to set to preset location. If there are unused preset
location, add it into routine, execute in looping way the 3) and 4), or execute 5) and the
set is over.
5) Execute the command of setting 40th preset location, and save the set and exit in
addition to calling preset location. Executing any command other than, such as up, down,
right or left does not need to be saved before exit.
Run preset location scan: call 40th - 43rd preset locations to run 1st-4th group preset scan
location series.
3.2.1 PRESET LOCATION SCAN
1.
2.
Calling 107 followed by 108 and restarting the dome
XSD27ZS - Operating Manual
