12
There are two ways to set the area of scanning.
Using special preset location order
Setting of the left boundary: dome is controlled to ideal position and preset location
44 is called to set the left boundary of Region 1
Setting of the right boundary: dome is controlled to ideal position and preset location
45 is called to set the right boundary of Region 1
Using keyboard for setting
Menu set -> scan set -> area scanning
Setting of the left boundary: control the dome to ideal position and press ‘OPEN’ key
to set the left boundary or Region 1
Setting of the right boundary: control the dome to ideal position and press ‘OPEN’ key
to set the right boundary of Region 1
4 area scanning can be set and the method is the same.
Setting of scanning speed: see ‘menu set -> auxiliary set’
Setting of regional title: see ‘menu set -> title set’
Operating area scanning
Call the preset location 52-55 to operate area scanning path 1-4 respectively
Dome rotates between the set right and left boundary according to the set speed and
the screen displays the corresponding regional title.
3.2.2 AREA SCANNING
Setting of pattern scanning
1. Call preset location 56 to start setting pattern scanning
2. Operate ‘up, down, left, right, WIDE, TELE, NEAR, FAR, CLOSE and OPEN on the dome.
3. Call preset location 57-60 to save the 1-4 pattern scanning
Operation of pattern scanning
Call the preset location 61-64 to operate pattern scanning path1-4 respectively
3.2.3 PATTERN SCANNING
XSD27ZS - Operating Manual
