XVision X2RN, Руководство пользователя

Страница: 57 / 116

USER MANUAL
5.4.1 General
If you connect to a router allows to use DHCP, please check the DHCP box. The router will assign
automatically all the network parameters for your NVR. Unless the network is manually addressed
below parameters:
IP Address : The IP address identifies the NVR in the network. It consists of four groups of
numbers between 0 to 255, separated by periods. For example, “192.168.001.100”.
Subnet Mask : Subnet mask is a network parameter which defines a range of IP addresses that
can be used in a network. If IP address is like a street where you live then subnet mask is like a
neighborhood. The subnet address also consists of four groups of numbers, separated by periods.
For example, “255.255.000.000”.
Gateway : This address allows the NVR to access the Internet. The format of the Gateway
address is the same as the IP Address . For example, “192.168.001.001”.
DNS1/DNS2 : DNS1 is the primary DNS server and DNS2 is a backup DNS server. Usually should
be enough just to enter the DNS1 server address.
52