XVision X2RN, Руководство пользователя, Страница: 38 / 116

USER MANUAL
Buzzer : Disable or to active the buzzer to emit an alarm tone in 10, 20, 40 or 60 seconds when the
detection is triggered
Sensitive
: The sensitivity level is from 1 to 4. Higher sensitivity will be easier to trigger the
detection.
Scene : Scene setting includes Indoor and Outdoor. Please choose the scene to match with the
place your camera installed.
Post Recording : You can set how long after an event occurs that the NVR will continue to record.
Latch Time
: To configure the external alarm time when the detection is triggered.
Alarm Out : If your NVR support to connect to external alarm device, you can set to emit an alarm
tone.
Show Message : A letter “S” will be displayed on the screen when the LCD function is triggered.
Send Email : If an alarm is triggered, an Email will be sent to your preset email account.
Full Screen : When the detection is triggered, the channel will be enlarged into full screen.
Record Channel :
to select the channel(s) you want to record when a detection is triggered.
Area : Click [ Setup ] to draw a virtual line in the camera picture.
1. Choose one of the Rule Number. It is the number of LCD lines. Maximum 4 lines you can
draw.
2. To enable the detection in Rule Switch .
3. Choose a Rule Type .
A

B: NVR will only detect the action from side A to side B;
B

A: NVR will only detect the action from side B to side A;
A

B: NVR will detect the action from either side B to side A or side A to side B.
4.
Use your mouse to click 2 points in the camera picture to draw a virtual line.
5.
Click
Save
to save your settings.
6. If you want to modify the position or length of the line, click the red box in the line, the color of
the line will be changed to red color. Long press the left button of your mouse to move the line,
or drag the terminals to modify the length or position of the line.
7.
If you want to remove one of the lines from the camera picture, click the red box in the line and
33