Xtreme Manufacturing XRM945 страница 8 Скачать руководство пользователя

Страница: 8 / 76

For information call (800) 497-1704

Page 7

XRM

Safety

Employer Responsibility

Under Occupational Safety and Health Administration

(OSHA) rules, employers are required to train workers

about hazards related to operating and maintaining the

forklift. Successful completion and certification of Safety

Training for Rough Terrain Forklifts is required.
Additional safety information and training resources can

be obtained through these publications, organizations,

and/or other appropriate sources:
• Code of Federal Regulations (29 CFR)
• Occupational Safety and Health Administration (OSHA)
• National Institute for Occupational Health and Safety

(NIOSH)

• American National Standards Institute (ANSI)
• Association of Equipment Manufacturers (AEM)
• The American Society of Mechanical Engineers (ASME)
Always consult Material Safety Data Sheets (MSDS) for

chemical hazards and first aid instructions for any oil or

lubricant being used. MSDS should be available from the

manufacturer/supplier of the fluid.

Operator Responsibility



Warning

Reach forklifts are potentially dangerous if proper

safety procedures are not followed. Workers who

operate, maintain, or work near the forklift can be at

risk of roll over and run over incidents. Workers can

be crushed or caught by the forklift or its parts if the

forklift is not properly operated or maintained.

Read the Operation and Safety

Manual BEFORE operating

the forklift. Follow all safety

instructions and decals.

Only operate the forklift if you understand the

safety instructions and warnings in all applicable

manuals and technical publications. Always follow

all State and Federal health and safety laws and/or

local regulations.
You must have the required training, skills, and tools

to perform installation, operation, maintenance, or

repair procedures properly and safely. Make sure the

forklift and attachments will not be damaged or made

unsafe by any procedures you choose.

Operator Qualifications

Operators must be in good physical and mental condition,

with appropriate reflexes, reaction time, vision, depth

perception, and hearing.
Operators must possess a valid, current driver’s license

as required for the worksite; plus those required by

applicable State, Federal, and/or local laws.
Successful completion and certification of Safety Training

for Rough Terrain Forklifts is required.
• Operators must be properly instructed on how to

operate the forklift and attachments.

• Operators must operate the forklift according to ALL

appropriate safety regulations.

• Operator trainees must remain under

constant observation and supervision of an

experienced operator.

Modifications



Warning

Modifications to the forklift or

attachments could affect forklift

capacity and/or stability. DO NOT

make modifications to the forklift or

attachments without prior written approval from the

manufacturer. Where such authorization is granted,

capacity, operation, and maintenance instruction

plates, tags, or decals shall be changed accordingly.
• Unauthorized modifications or alterations will void

the warranty.

• DO NOT modify, disable, or bypass any safety

devices.

• DO NOT burn or drill holes in forks or other

attachments.

Structural damage, modification, or

alteration, including welding or drilling,

can impair and weaken the protective

capability of the Rollover Protective

Structure/Falling Object Protective Structure (ROPS/

FOPS) and can result in injury or death.
• Replace the ROPS/FOPS, if it is damaged, before

operating the forklift.

Содержание XRM945













































































Результаты поиска

Содержание XRM945

Отзывы:

Похожие инструкции для XRM945

Бренды по названию

Популярные бренды

Xtreme Manufacturing XRM945, Инструкция по эксплуатации и безопасности

Результаты поиска

Содержание XRM945

Отзывы:

Похожие инструкции для XRM945

Бренды по названию

Популярные бренды