Xtreme Manufacturing XRM945 страница 45 Скачать руководство пользователя

Страница: 45 / 76

For information call (800) 497-1704

Page 45

XRM

Operation



Warning

Lead-acid batteries produce flammable and

potentially explosive gases. To avoid injury or death

when checking, testing, or charging batteries:
• DO NOT use smoking materials near batteries.
• Keep arcs, sparks, and open flames away from

batteries.

• Provide ventilation for flammable vapors.
• Wear proper personal protective equipment,

including safety glasses.

Fluid in electric storage batteries contains sulfuric

acid, which is poison and can cause severe chemical

burns. Avoid all contact of fluid with eyes, skin,

or clothing. Use protective gear when handling

batteries. DO NOT tip a battery beyond a 45° angle in

any direction.
If contact does occur, follow these First Aid

suggestions:
• External contact - Flush with water.
• Eyes - Flush with water for at least 15 minutes and

get medical attention immediately.

• Internal contact - Drink large quantities of water.

Follow with Milk of Magnesia, beaten egg, or

vegetable oil. Get medical attention immediately.

IMPORTANT - In case of internal contact, DO NOT give

fluids that induce vomiting.



Warning

California Proposition 65

Battery posts, terminals, and related

accessories contain lead and lead

compounds, chemicals known to the

State of California to cause cancer, birth

defects, or other reproductive harm. Wash hands after

handling these items.



Warning

Wear eye protection when starting a

forklift with jump start cables. Improper

jump start procedures can cause the

battery to explode.
• Never jump start a frozen battery, as it can explode.

Let the battery thaw out before charging.

• NEVER jump start the forklift directly at the starter

solenoid, which could cause the forklift to lurch

forward or backward, resulting in injury or death.

• To avoid injury or death when jump starting with

another vehicle, make sure the two (2) vehicles are

not touching.

• DO NOT allow jump start cable ends to contact each

other near the battery.

• Connect charged battery positive (+) to stalled

battery positive (+).

• Connect charged battery negative (–) to stalled

forklift ground. Make the connection to the stalled

forklift ground last.

• Connect jump start cable to stalled forklift ground

a safe distance from the battery to prevent sparks

near the battery.

• Jump start only with a power source with the same

voltage as the stalled forklift.

• Jump start power source must have a negative

ground electrical system.

• Turn off all lights and accessories on the stalled

forklift to prevent them from operating when the

power source is connected.



Caution

Electrolyte is an acid and can cause injury if it contacts

the skin or eyes.



Warning

Tires must have proper ballast. DO NOT

replace foam-filled tires with pneumatic

tires.

Содержание XRM945













































































Результаты поиска

Содержание XRM945

Отзывы:

Похожие инструкции для XRM945

Бренды по названию

Популярные бренды

Xtreme Manufacturing XRM945, Инструкция по эксплуатации и безопасности

Результаты поиска

Содержание XRM945

Отзывы:

Похожие инструкции для XRM945

Бренды по названию

Популярные бренды