Xtreme Manufacturing XRM945, Инструкция по эксплуатации и безопасности

Страница: 58 / 76

Page 58
Xtreme Manufacturing, LLC
Operation XRM 9 45
Figure 7-20. Fork Ratings.
(A) Maximum Load Capacity Rating. (B) 24 Inch Load Center.
Because forks are always used in multiples, the total
rating of any combination of forks will be the sum of their
rated capacity. Other than block forks, all forks should
be used in matched pairs. Block forks should be used in
matched sets.
The maximum load capacity for this forklift is
9,000
pounds (4 082 Kilograms). The matched pair or set of
forks used on this forklift should have total load ratings
which equal or exceed 9,000 pounds (4 082 Kilograms).
When the load rating of the forklift differs from the load
capacity of the forks, the lower value becomes the
overall load capacity.
Standard Carriage Operation
The standard carriage uses manually adjustable forks and
can be tilted up or down using the attachment tilt and
frame sway control handle.
Figure 7-21. Attachment Tilt and Frame Sway Control Handle.
The standard carriage can also be tilted up or down using
the
OPTIONAL
Attachment Tilt Control switch.
Figure 7-22. optional Attachment Tilt Control Switch. (A) Attachment
Tilt Down. (B) Attachment Tilt Up.
Swing Carriage Operation
The swing carriage can be tilted up or down using the
attachment tilt and frame sway control handle or the
OPTIONAL
Attachment Tilt Control switch and can pivot
left or right using the auxiliary attachment control lever.
Figure 7-23. Auxiliary Attachment Control Lever.