Xtreme Manufacturing XRM945 Скачать руководство пользователя страница 47

Страница: 47 / 76

For information call (800) 497-1704

Page 47

XRM

Operation

Functional Tests



Warning

Perform a pre-operation inspection and

functional tests at the beginning of each

work shift. Perform the pre-operation

inspection of the forklift first. DO NOT

perform the pre-operation inspection with the engine

running or hot. Contact with moving or heated parts

can cause injury or death.

Perform the pre-operation inspection

and functional tests in an open area.

Inspections and functional tests may

require assistance. Keep the assistant

visible and a safe distance from the forklift to prevent

injury or death.

Remove forklift from service and place “Do

Not Operate” tags on the Starter switch

and steering wheel if anything is found

to be in need of repair or maintenance,

defective, or unsafe in any way.

The safety, efficiency, and service life of your reach

forklift will be increased by performing functional

tests at the beginning of each shift. If any of the items

in the functional tests are not operating properly or

within set tolerances, stop the forklift, follow proper

shut down procedures, tag the forklift with “Do Not

Operate” tags, and have a qualified mechanic service

or repair the forklift before placing it into service

again.

Functional Test Checklist

Operate the boom control handle forward and

backward to raise and lower boom.
Operate the boom control handle left and right to

extend and retract boom.
Operate the attachment tilt and frame sway control

handle forward and backward to tilt attachment up

and down.
Operate the attachment tilt and frame sway control

handle left and right to sway frame left and right.
Operate the auxiliary attachment control lever (if a

hydraulic attachment is being used).
Turn worklights off and on.
Press the horn button to sound horn.
Place the travel select lever in reverse to sound the

backup alarm.
Operate the forklift in forward and reverse.
Test the gear select lever while operating the forklift in

forward and reverse.
Test the service and parking brakes.

Apply the service brake pedal after the forklift

begins to move and the forklift should stop

immediately.
Apply the parking brake. The forklift should not

move unless the parking brake is released.

Test each steering function. Operate the forklift

in forward and reverse at low idle speed and turn

the steering wheel approximately 1/4 turn in each

direction.

Align the wheels and set the Steering Select switch

to crab steering.
Align the wheels and set the Steering Select switch

to 2 wheel (2W) steering.
Align the wheels and set the Steering Select switch

to 4 wheel (4W) steering.

Check gauges after the engine warms to the proper

operating range.

Check the voltage gauge. The voltage gauge

should read between 11 to 15 Volts.
Check the engine coolant temperature gauge. The

engine coolant temperature gauge should read

between 180 to 200°F.
Check the engine oil pressure gauge. The engine oil

pressure gauge should read between 40 to 80 PSI.
Check the fuel gauge and make sure the fuel gauge

reads between 1/2 to Full. Fill the fuel tank if fuel

Содержание XRM945













































































Результаты поиска

Содержание XRM945

Отзывы:

Бренды по названию

Популярные бренды

Xtreme Manufacturing XRM945, Инструкция по эксплуатации и безопасности

Результаты поиска

Содержание XRM945

Отзывы:

Бренды по названию

Популярные бренды