Xtreme Manufacturing XRM945 Скачать руководство пользователя

Страница: 50 / 76

Page 50

Xtreme Manufacturing, LLC

Operation

XRM

Starting Forklift

Normal Starting



Warning

To prevent property damage, injury, or

death the operator must be seated with

seat belt fastened, arms, legs, and head

completely inside the Rollover Protection

Structure/Falling Object Protection Structure (ROPS/

FOPS), the travel select lever in NEUTRAL, the Parking

Brake switch ON (engaged), and the service brakes

applied BEFORE starting the forklift.

Place key in Ignition switch.

Figure 7-9. Key and Ignition Switch.

Caution

Release the key immediately once the motor starts.

If the motor does not start, DO NOT crank the starter

motor continuously for more than 15 seconds. Failure

to release the key after the motor has started or

continuous cranking can damage the starter motor.

Turn key in Ignition switch clockwise to the

START position.

Figure 7-10. Turn Key In Ignition Switch To START.

Release the key immediately after the engine starts.

The Ignition switch will automatically return to RUN.

NOTE:

The PREHEAT and START positions are spring-

loaded. When the key is released, the Ignition switch

will automatically return to the RUN position.

Figure 7-11. Ignition Switch Automatically Returns To RUN.

NOTE:

If the engine fails to start on the first try, wait

until the engine and starter come to a complete stop

before cranking the engine again.

After the engine starts, run the engine at partial

throttle speed for 30 to 60 seconds.

Return engine to idle speed before engaging the

travel or gear select lever.

Apply the service brake pedal and disengage the

Parking Brake switch.

Содержание XRM945













































































Результаты поиска

Содержание XRM945

Отзывы:

Похожие инструкции для XRM945

Бренды по названию

Популярные бренды

Xtreme Manufacturing XRM945, Инструкция по эксплуатации и безопасности

Результаты поиска

Содержание XRM945

Отзывы:

Похожие инструкции для XRM945

Бренды по названию

Популярные бренды