Xtreme Manufacturing XRM945 Скачать руководство пользователя страница 59

Страница: 59 / 76

For information call (800) 497-1704

Page 59

XRM

Operation



Warning

Hydraulic attachments have a

maximum hydraulic pressure

rating. Failure to make sure

the attachment is equal to or

slightly greater than 3,500 psi (241.4 bar), which is the

maximum pressure of the forklift auxiliary hydraulic

system at the quick attach couplers, could result in

injury or death.

When the auxiliary attachment control lever is moved

right or left it activates hydraulic pressure through the

quick attach couplers to move the carriage.

Figure 7-24. Quick Attach Couplers For Hydraulic Systems.

(A) Female Coupler. (B) Male Coupler.

Quick Attach System

This forklift includes a quick attach system that allows

for easy attachment changes. Perform attachment

connection and removal procedures on level ground.

Attachment Connection



Warning

Improper connection of an auxiliary

attachment can result in injury or death.

Attachments not locked into place can

break free and fall on the operator or

other personnel near the forklift.
• Make sure attachment locking devices are always in

place.

• DO NOT operate the forklift until you have positive

indication that the quick attach pin and lock lever

are fully engaged.

Position the forklift directly behind the attachment.

NOTE:

Allow enough distance to extend the boom

approximately 18 to 20 inches (0.46 to 0.5 meters).

Figure 7-25. Position Quick Attach Link In Line With Attachment.

Содержание XRM945













































































Результаты поиска

Содержание XRM945

Отзывы:

Бренды по названию

Популярные бренды

Xtreme Manufacturing XRM945, Инструкция по эксплуатации и безопасности

Результаты поиска

Содержание XRM945

Отзывы:

Бренды по названию

Популярные бренды