Xtreme Manufacturing XRM945 Скачать руководство пользователя страница 34

Страница: 34 / 76

Page 34

Xtreme Manufacturing, LLC

Operator Cab

XRM

Controls and Indicators

Travel Select Lever

The travel select lever has three (3) positions:

FORWARD, NEUTRAL, and REVERSE, which change the

direction of travel.

Table 6. Travel Select Lever

Position

Purpose

Forward UP Position (Away from the operator).

Neutral

CENTER Position.

Reverse

DOWN Position (Toward the operator).

Figure 6-17. Travel Select Lever.

The travel select lever automatically locks when it is in the

NEUTRAL position. The operator must raise and move

the travel select lever when changing to the FORWARD or

REVERSE position.

NOTE:

The travel select lever must be in the

NEUTRAL position to start the reach forklift.

NOTE:

The back-up alarm automatically sounds when the

travel select lever is in the REVERSE position.

Gear Select Switch

The Gear Select switch has a twist grip handle with

four (4) positions: 1 – FIRST, 2 – SECOND, 3 – THIRD, and

4 – FOURTH.

NOTE:

The reach forklift can be operated in four (4)

forward and four (4) reverse gears.

Figure 6-18. Gear Select Switch.

Parking Brake Switch

The Parking Brake switch (A) has two (2) positions: ON

and OFF.

Figure 6-19. Parking Brake.

(A) Parking Brake Switch Guard. (B) Parking Brake Indicator.

Set Parking Brake switch (A) to ON (DOWN) to engage the

parking brake and to OFF (UP) to disengage the parking

brake. The parking brake indicator (B) illuminates when

the parking brake is set to ON (engaged).

Содержание XRM945













































































Результаты поиска

Содержание XRM945

Отзывы:

Бренды по названию

Популярные бренды

Xtreme Manufacturing XRM945, Инструкция по эксплуатации и безопасности

Результаты поиска

Содержание XRM945

Отзывы:

Бренды по названию

Популярные бренды