Xtreme Manufacturing XR619 Скачать руководство пользователя

Страница: 52 / 74

Operation Manual

www.xmfg.com

Operation

Shut Down Procedure

1. Park telehandler on level ground, if possible.

2. Stop the telehandler by applying the service brake pedal.

3. Place the travel select lever in NEUTRAL (N) and set the

parking brake to ON (engaged).

4. Lower the boom and rest carriage on ground.

5. Turn the ignition key to OFF and remove the key.

Stopping Travel

Warning

To prevent death, serious injury, or property

damage, apply service brakes until the

telehandler comes to a complete stop, move

travel select lever to NEUTRAL (N), set the

Parking Brake switch to ON (engaged), lower

and retract the boom, and shut off the engine before exiting

the telehandler.

1. Stop the telehandler by applying the service brake pedal.

2. Slow the telehandler until it comes to a complete stop.

3. Move the travel select lever to NEUTRAL (N).

4. Set the parking brake to ON (engaged).

Warning

Make sure the telehandler comes to a

complete stop before moving the travel select

lever. A sudden change in direction of travel,

while carrying a load, can reduce stability

and/or cause the load to shift or fall, which

could result in death, serious injury, or property damage.

Changing Travel Direction

1. Stop the telehandler by applying the service brake pedal.

2. Move travel select lever to FORWARD (F) or REVERSE (R).

3. Release the service brake pedal.

4. Slowly press the accelerator pedal to start travel.

Warning

To prevent death or serious injury, the

operator must be seated with seat belt

fastened, the travel select lever set to

NEUTRAL, the Parking Brake ON (engaged),

and the area free of people and obstructions

BEFORE starting the telehandler.

1. Start the telehandler. Refer to the Starting Telehandler

section in this manual.

2. Apply service brake.

3. Release parking brake.

4. Move the travel select lever to FORWARD or REVERSE for

the appropriate direction of travel.

5. Release the service brake pedal.

6. Slowly press the accelerator pedal to start travel.

Warning

Use proper safety procedures and avoid

hazardous situations while operating the

telehandler to prevent death, serious injury,

or property damage.

•

Check the work site for any hazards before operating

the telehandler.

•

Check the work surface for loose soil conditions and

overhead power lines.

Starting Travel

Warning

Always engage the parking

brake before leaving the tele-

handler. The telehandler can

roll if the parking brake is not

ON (engaged), which could re-

sult in death, serious injury, or property damage.

Содержание XR619











































































Результаты поиска

Содержание XR619

Отзывы:

Похожие инструкции для XR619

Бренды по названию

Популярные бренды

Xtreme Manufacturing XR619, Руководство по эксплуатации и безопасности

Результаты поиска

Содержание XR619

Отзывы:

Похожие инструкции для XR619

Бренды по названию

Популярные бренды