Xtreme Manufacturing XR619 Скачать руководство пользователя

Страница: 51 / 74

Operation Manual

www.xmfg.com

Operation

Warning and Fault Indicators

Warning

A fault condition may trigger a popup dialog

box on the display describing the nature of

the fault during operation. Corresponding

red or amber warning lights will illuminate to

indicate the severity of the fault. If an Engine

Shutdown fault condition is present, stop the Telehandler,

follow proper shut down procedures, tag the Telehandler

with “Do Not Operate” tags, and have a qualified mechanic

service or repair the Telehandler BEFORE placing it into

service again. Report all warning indicators and fault codes

to a qualified mechanic. Ignoring warning indicators or

fault codes can cause improper performance, which could

result in death, serious injury, or property damage.

Low Fuel Level Indicator. It is dark gray at normal

operating level.

Critically Low Fuel Level Warning

High Hydraulic Temperature Indicator

Low Hydraulic Oil Pressure Indicator, between 10

and 20 psi.

Engine must be running above 500 RPM

Low Hydraulic Oil Pressure Warning, below 10 psi

Service Reminder

Wait To Start Indicator

Water In Fuel Indicator

Fault condition dialog boxes may pop up and warning lights

on the display will illuminate during critical circumstances.

Some of these conditions demand immediate attention and

Telehandler servicing. If an Engine Shutdown fault condition

is present, the Telehandler should be shut down as soon as

practical to prevent serious mechanical failure.
Some of the following indicators are green while the engine

is within normal operation range, turning yellow when the

normal operating range is exceeded. Some of these indicators

turn red and become warnings when a particular parameter

reaches or exceeds a critical level.

Battery Voltage Indicator. Dark gray at normal op-

erating range of 12.6-14V. It becomes a yellow indi-

cator at low battery voltage, between 11.5 to 12.5 V.

Critically Low Battery Voltage Warning, below 11.5 V

Hydraulic Oil Pressure Indicator, above 20 psi.

En-

gine must be running above 500 RPM

Engine Load Indicator (yellow, above 90%) or Warn-

ing (red, at or above 99%). Dark gray at normal op-

erating range.

Coolant Temperature Indicator. Dark gray at normal

operating range of 180 to 2050F. High coolant tem-

perature indicator (yellow) between 205 and 2150F.

It becomes a RED Critically High Coolant Temperature Warn-

ing, above 2160F.

Содержание XR619











































































Результаты поиска

Содержание XR619

Отзывы:

Похожие инструкции для XR619

Бренды по названию

Популярные бренды

Xtreme Manufacturing XR619, Руководство по эксплуатации и безопасности

Результаты поиска

Содержание XR619

Отзывы:

Похожие инструкции для XR619

Бренды по названию

Популярные бренды