Xtreme Manufacturing XR619 Скачать руководство пользователя

Страница: 32 / 74

Operation Manual

www.xmfg.com

Operator Cab

1. Grasp the free end of the seat belt (located on the right

side of the seat) and make sure the belt webbing is not

twisted or entangled in any portion of the seat assembly.

2. Pull the retractable seat belt across your lap. Position the

seat belt as low on your body as possible.

3. Insert the latch plate into the buckle (on the right side of

the seat) until a “click” is heard.

4. Make sure seat belt retracts snugly across your lap.

Rear View Mirrors

Two (2) adjustable rear view mirrors are provided to aid the

operator’s rear vision. The rear-view mirrors are mounted on

the upper left of the operator’s cab and the right front of the

chassis.

Fig 16. Rear View Mirrors

Seat Belt

Fore and Aft Adjustment Lever

Pull the fore and aft adjustment lever outward from the seat

to release the seat lock. Slide the seat forward or backward to

a comfortable location and release the lever to lock the seat in

the desired position.

Warning

Always check the condition of the seat belt

and mounting hardware before operating

the Telehandler. If the seat belt or mounting

hardware is defective, it may not properly

restrain the operator, which could result in

death or serious injury.
•

DO NOT operate the Telehandler until the seat belt or

mounting hardware is replaced, if worn or damaged.

•

The seat belt MUST be worn while operating the

Telehandler. Failure to wear the seat belt could result in

death or serious injury.

The Telehandler is equipped with a standard two inch (2”)

wide retractable seat belt. A three inch (3”) wide retractable

seat belt is available where required by state and local laws

and regulations.

Warning

DO NOT adjust the seat or seat belt while the

Telehandler is moving. Keep both hands on

the wheel while the Telehandler is moving

to prevent loss of Telehandler control which

could result in death or serious injury.

Before starting the engine, adjust the seat for position and

comfort (refer to the Operator Seat section of this manual) and

then adjust the seat belt as follows:

Backrest Angle Adjustment Lever

Pull the backrest angle adjustment lever up to release the seat

backrest lock. Adjust the angle of the backrest and release the

lever to lock the backrest to the desired angle.

Содержание XR619











































































Результаты поиска

Содержание XR619

Отзывы:

Похожие инструкции для XR619

Бренды по названию

Популярные бренды

Xtreme Manufacturing XR619, Руководство по эксплуатации и безопасности

Результаты поиска

Содержание XR619

Отзывы:

Похожие инструкции для XR619

Бренды по названию

Популярные бренды