Operation Manual
34
www.xmfg.com
Operator Cab
Light Switches
The Light Switches control the boom and cab lights.
Fig 20. Light Switches
Turn Signal and Hazard Switches
The optional Turn Signal Switch controls the turn signals
(toggle left or right). The optional Hazard Light Switch flashes
all four (4) turn signals (toggle up or down).
Fig 21. Turn Signal and Hazard Light Switches
Steering Select Switch
The Steering Select switch has three (3) steering positions:
Crab, Two Wheel Steering (2W), and Four Wheel Steering (4W).
Fig 22. Steering Select and 2-Wheel Rear Switches
Warning
DO NOT change steering modes until the forklift comes
to a complete stop. Align all four (4) wheels perpendicular
to the axle, before changing steering mode. Changing
steering modes at higher travel speeds can make the forklift
unstable, and cause a loss of control, which could result in
death, serious injury, or property damage.
Wiper Switch
The Wiper Switch operates the windshield wiper on enclosed
cab models. The switch has three (3) positions: Down - OFF,
Up - On, Hold Up - Wash.
Fig 23. Wiper Switch
Steering Mode Select Switch
The reach forklift includes three STANDARD modes of
steering:
•
Crab Steering
•
Two Wheel (2W)
•
Four Wheel (4W)
Use the Steering Mode Select switch located on the lower
right corner of the dash panel to change steering modes.