Xtreme Manufacturing XR619 Скачать руководство пользователя

Страница: 49 / 74

Operation Manual

www.xmfg.com

Operation

Normal Starting

Starting the Telehandler

Warning

To prevent death, serious injury, or prop-

erty damage, the operator must be seated

with seat belt fastened, arms, legs, and head

completely inside the Rollover Protection

Structure/Falling Object Protection Structure

(ROPS/FOPS), the travel select lever in NEUTRAL, and the

Parking Brake switch ON (engaged) BEFORE starting the

telehandler.

1. Place Key in Ignition Switch.

2. Turn key in ignition switch clockwise to the RUN position.

Caution

Release the key immediately once the engine starts. If the

engine does not start, DO NOT crank the starter motor con-

tinuously for more than 15 seconds. Failure to release the

key after the engine has started or continuous cranking can

damage the starter motor.

3. Turn key in ignition switch clockwise to the START

position. You may need to hold the key in this position

for a few seconds before the engine begins to crank (see

NOTE).

NOTE: If the engine fails to start on the first try, wait until the

engine and starter come to a complete stop before cranking

the engine again.

4. Release key immediately after the engine starts. The

Ignition Switch will automatically return to RUN.

NOTE:

Wait for display to boot up and “Engine Wait to Start”

indicator to go out.

NOTE: The START position is spring-loaded. When the key is

released, the ignition switch will automatically return to the

RUN position.

NOTE:

The engine requires fuel pressure to be generated

before the engine will crank. You may have to hold the

ignition key in the START position for a few seconds before

the engine begins to crank.

5. After the engine starts, allow the engine to idle for

approximately 60 seconds.

Содержание XR619











































































Результаты поиска

Содержание XR619

Отзывы:

Похожие инструкции для XR619

Бренды по названию

Популярные бренды

Xtreme Manufacturing XR619, Руководство по эксплуатации и безопасности

Результаты поиска

Содержание XR619

Отзывы:

Похожие инструкции для XR619

Бренды по названию

Популярные бренды