Xtreme Manufacturing XR619 Скачать руководство пользователя

Страница: 41 / 74

Operation Manual

www.xmfg.com

Operator Cab

Boom Angle Indicator

The boom angle indicator is located on the left side of the

boom and is visible from the operator’s seat. Use the boom

angle indicator to determine the boom angle when referring

to load capacity charts. Refer to the LOAD CAPACITY CHARTS

section of this manual for more information.
NOTE: The boom angle indicator is a plumb arrow with

angular graduations from -2.30 to +690

Fig 47. Boom Angle Indicator

Boom Extend Letters

As the boom is extended, the boom extend letters on the left

side of the boom are visible to the operator. These letters

indicate boom extension as it corresponds to the load capacity

charts.

Fig 48. Boom Extend Letters

Frame Level Indicator

The frame level indicator is mounted on the upper right

corner of the operator’s cab. The frame level indicator allows

the operator to view if the forklift has been positioned in a

level condition.

Fig 49. Frame Level Indicator

Boom Maintenance Stand (Optional)

This machine is equipped with a Boom Maintenance Stand,

which is used during any and maintenance activities where

the boom is raised. It is a prop installed around the rod of the

lift cylinder when the boom is raised.
•

When preparing to set boom stand, make sure machine

is on a flat level ground and machine has no load on the

forks.

•

Raise machine boom to 40 degrees for clearance and then

install the Boom Maintenance Stand prop around the rod

of the lift cylinder.

Fig 46. Joystick Functions

Содержание XR619











































































Результаты поиска

Содержание XR619

Отзывы:

Похожие инструкции для XR619

Бренды по названию

Популярные бренды

Xtreme Manufacturing XR619, Руководство по эксплуатации и безопасности

Результаты поиска

Содержание XR619

Отзывы:

Похожие инструкции для XR619

Бренды по названию

Популярные бренды