xtra XR10, Оригинальное сервисное руководство, Страница: 6 / 20

5 |
P a g e
GB
Cabinets have their parameters set at point of build to the correct settings.
If you wish to modify these set points then you should have a full understanding of their
purpose and the following instructions.
To amend any parameter press buttons 1 & 2 together for 5 seconds.
Parameter ‘P01’ will be displayed when the menu has been successfully accessed.
To move to the next parameter press button 1 or 2. Once on the parameter you wish to adjust press
and hold button 3 while also using button’s 1 or 2 to modify the pre-set value.
After adjustment has been made release button 3 to save the changes. The menu will automatically
show the next parameter.
If no buttons are pressed for 5 seconds then the controller will leave the adjustment menu.