xtra XR10, Оригинальное сервисное руководство

Страница: 13 / 20

12 |
P a g e
GB
Important: Before cleaning or the removal of any parts, the unit should be put into
standby and then the power supply should be turned off at the mains.
Please do not plug or unplug the unit with wet hands. Only when cleaning has been
completed and the unit is dry should the cabinet be turned back on at the mains. Using
high pressure water jets or lances is prohibited; the warranty policy will not cover
problems that result from failure to heed the above warning.
Removing the Unitcover
You should only be required to remove the unitcover for access to the condenser, compressor and or
controller electrics.
Remove both the fixing screws situated at the bottom on the unitcover. Tilt the cover forward and
pull towards you. Refitting is the same action but in reverse ensuring the fixing screws are refit.
XR10 & 20 Models
XR35 Model
Condenser
Controller Electrics
Unitcover
Fixing Screws
Fixing Screws
Unitcover
Controller
Electrics
Condenser Fan Motor/ Plate