xtra XR10, Оригинальное сервисное руководство

Страница: 15 / 20

14 |
P a g e
GB
Door Removal
Firstly remove the unitcover (as described before), and
unscrew the pivot screw from the top of the door. You can
now remove the door from the upper hinge bracket.
To refit reverse these instructions and make sure to refit the
spacer washer.
(The unitcover is only visible on this image for illustrative
purposes)
Door Gaskets
Door gaskets should be inspected on a regular basis and replaced if damaged. To clean, wipe with a
warm damp soapy cloth followed by a clean damp cloth. Finally thoroughly dry before closing the
door.
Regular Cabinet Cleaning
As and when required remove all product and shelving (beware of cold and or sharp components)
from the unit. Clean exterior and interior surfaces with mild liquid detergent, following the directions
on the pack at all times. Rinse surfaces with a damp cloth containing clean water. Never use wire
wool, scouring pads/powders or high alkaline cleaning agents i.e. bleaches, acids and chlorines as
these may cause damage. Dry the unit thoroughly before re-using.
Shelves, Pans and Supports
Shelves, Pans and their supports should be removed to clean. The shelves and pans are dishwasher
safe; however the supports should be cleaned with warm soapy water then rinsed and dried
.
Pivot
Door
Pivot
Screw
Top Hinge Bracket
& fixing screws