background image

  

 

 

2 | 

P a g e

 

 

GB 

 
Product Support and Installation Contractors. 

 

 
Foster Refrigerator recognises that its activities, products and services can have an adverse impact 
upon the environment.  
The organisation is committed to implementing systems and controls to manage, reduce and 
eliminate its adverse environmental impacts wherever possible, and has formulated an 
Environmental Policy outlining our core aims. A copy of the Environmental Policy is available to all 
contractors and suppliers upon request.  
The organisation is committed to working with suppliers and contractors where their activities have 
the potential to impact upon the environment. To achieve the aims stated in the Environmental 
Policy we require that all suppliers and contractors operate in compliance with the law and are 
committed to best practice in environmental management.  
Product Support and Installation contractors are required to:  
1. Ensure that wherever possible waste is removed from the client’s site, where arrangements are in 
place all waste should be returned to Foster Refrigerator’s premises. In certain circumstances waste 
may be disposed of on the client’s site; if permission is given, if the client has arrangements in place 
for the type of waste.  
 
2. If arranging for the disposal of your waste, handle, store and dispose of it in such a way as to 
prevent its escape into the environment, harm to human health, and to ensure the compliance with 
the environmental law. Guidance is available from the Environment Agency on how to comply with 
the waste management ‘duty of care’.  
 
3. The following waste must be stored of separately from other wastes, as they are hazardous to the 
environment: refrigerants, polyurethane foam, and oils.  
 
4. When arranging for disposal of waste, ensure a waste transfer note or consignment note is 
completed as appropriate. Ensure that all waste is correctly described on the waste note and include 
the appropriate six-digit code from the European Waste Catalogue. Your waste contractor or Foster 
can provide further information if necessary.  
 
5. Ensure that all waste is removed by a registered waste carrier, a carrier in possession of a waste 
management licence, or a carrier holding an appropriate exemption. Ensure the person receiving the 
waste at its ultimate destination is in receipt of a waste management licence or valid exemption.  
 
6. Handle and store refrigerants in such a way as to prevent their emission to atmosphere, and 
ensure they are disposed of safely and in accordance with environmental law.  
 
7. Make arrangements to ensure all staff who handle refrigerants do so at a level of competence 
consistent with the City Guilds 2078 Handling Refrigerants qualification or equivalent qualification.  
 

8. Ensure all liquid substances are securely stored to prevent leaks and spill, and are 

not 

disposed of into storm 

drains, foul drain, or surface water to soil. 

 

If not disposed of properly all refrigerators have components that can be harmful to the environment. 
All old refrigerators must be disposed of by appropriately registered and licensed waste contractors, 
and in accordance with national laws and regulations. 

Foster Refrigerator recommends that the equipment is electrically connected via a Residual Current 
Device; such as a Residual Current Circuit Breaker (RCCB) type socket, or through a Residual Current 
Circuit Breaker with Overload Protection (RCBO) supplied circuit. 

 

Содержание XR10





















Отзывы: