15
User Direction
Pedal Adjustment
To adjust the pedal strap, remove the Velcro end of the strap from the
mesh side by pulling it upward then to the left.
Once removed, you may increase the opening of the pedal strap by pulling
the mesh end up and to the right.
To tighten, pull the Velcro end of the pedal strap upward
then to the right and down to secure it to the mesh side of the strap.
Moving the Machine
To move the machine, lift the rear stabilizer(4) until the
transportation wheels on the front stand touch the ground.
With the wheels on the ground, you can transport the rower to
the desired location with ease.
Adjusting the Balance
Levelers are found on the Rear Stabilizer (4) of the machine.
If you find the machine is unbalanced before or during your workout,
the Levelers (33) can be used to correct this issue. Continuously working
out on an unbalanced machine may cause damage to the machine.
Storing the Rower
When not in use, the rower can be stored vertically to save space. Take the Slide Rail (2) and move it into a
vertical position.
CAUTION: The Seat (38) will glide down when the Slide Rail (2) is raised.
Also take care to avoid the Rear
Stabilizer (4) when moving the Slide Rail (2).
4
38
2
38
2
4
7
4
4
33
