Figure 5-12 HDD management
Click alarm set button, the image is shown as below. See Figure 5-13.
Please highlight icon
to select the corresponding function.
You can set one or more alarm setups. The lower limit ranges from 1% to 99%. Alarm
channel number ranges from 1 to 6. Delay value is from 0 to 240 seconds.
Please note when HDD capacity is not full system only alarms once!
After all the setups please click OK button, system goes back to the previous menu
5.5.2 Alarm output
Figure 5-13 Alarm set
Here is for you to set proper alarm output.
Please highlight icon
to select the corresponding alarm output.
After all the setups please click OK button, system goes back to the previous menu.
See Figure 5-14.
Figure 5-14 Alarm output
55
