There are two ways for you to go to manual record interface.
●
In the main menu, Advanced->Manual Record.
●
In preview mode, click record button in the front panel or record button in the
remote control.
Manual record interface is shown as in Figure 4-5.
4.2.2.2 Basic operation
Here is for you to set manual record setup.
There are three statuses: schedule/manual/stop. Highlighted iconto select
corresponding channel.
●
Manual: the highest priority. After manual setup, all selected channels will begin
ordinary recording.
●
Schedule: channel records as you have set in recording setup (Main Menu-
>Setting->Schedule)
●
Stop: all channels stop recording.
Note:
These three recording types have the following priority:
Manual>Schedule>Stop.
4.2.2.3 Enable/disable record
Figure 4-5
Please check current channel status: means it is not in recording status,
means it is in recording status.
Then use direction key to highlight channel number. See Figure 4-6.
4.2.2.4 Enable all channel recording
Figure 4-6
Highlight below All, you can enable all channel recording.
●
All channel schedule record
28