XS Scuba Inspire Octopus, Руководство по обслуживанию

Страница: 25 / 38

25
www.XSscuba.com
XS Scuba Inspire Regulator Service Manual
iv. Using a 3/4” (19 mm) crows foot attachment or
a deep socket, apply a torque of 24 ft/lbs (1 Nm) to
the DIN housing (7).
v. Install the dust cap (9).
vi. Install the DIN handwheel (6) with the threads
facing upwards. (6)
vii. Insert unlubricated filter o-ring (5) into the DIN
housing (7). Make sure that it lays flat.
viii. Insert filter (4), pointed end first, into the DIN
housing (7).
ix. Install the two o-rings (1,3) on either side of the
handwheel retainer (2).
x. Thread the handwheel retainer (2), by hand.
into the DIN housing (7).
xi. Using a 6 mm hex key adapter, apply a torque
to the handwheel retainer (2) of 90 +/- 10 in/lbs (10 Nm).
13B
13B
13B
13B
13B
13B
13B