User Manual
XProHeli Silk Gimbal
Silk Gimbal
Page 4
©2014 XPROHELI. All Rights Reserved.
2.
Overview
The SILK 3 axis camera stabilization system is designed specifically
for lightweight - mirrorless DSLR cameras such as the Sony NEX,
Black Magic Pocket Cinema Camera and the Panasonic Lumix
GH4. The SILK frame is built from light yet strong-vibration resistant
CNC aluminum. The Silk’s lightweight design allows for relatively
comfortable handheld use and is less load demanding on multi-
rotor platforms resulting in longer flight times and extremely
smooth/stable video performance.
The SILK is a handheld or aerial ‘plug and play’ gimbal requiring
very little setup to operate. For almost all mirrorless DSLR cameras in
the 350g-850g weight range the Silk requires no changes to the
settings to operate incredibly well.
The SILK’s controller utilizes the latest stabilization algorithms from
Basecam Electronics (Alexmos) in conjunction with the latest 32 bit
ARM processor. Each Silk includes a licensed bootloader which will
allow you to upgrade the controller’s firmware at a later date
when any software improvements are made. The Silk’s electronics
are mounted to the back of the frame allowing users to detach the
SILK from their multi-rotor for handheld use.
The SILK typically comes in two primary configurations:
Silk Basic Pack
Silk Pro Pack
Powering the Silk is a 3S Lipo 4200mAh battery pack – providing
enough power for 2-2.5 hours of continuous run time. The Silk is
powered on by a LED rocker switch mounted on the top rear frame
tube:
IMPORTANT!
Be sure to take the time to
read this manual and watch
the setup videos! There is lots
of great information in this
manual and in our videos
that will help make you
successful in capturing
amazingly smooth footage.
POWER
