User Manual
XProHeli Silk Gimbal
Silk Gimbal
Page 25
©2014 XPROHELI. All Rights Reserved.
Connect the provided banana to 3-way male JST adapter harness
to the battery. One of the 3 male leads will be used to provide
power to the Silk. The other two leads can be used to power a light
set or a on board monitor (12v out).
Powering On Silk
Prior to powering on your Silk for the first time you should have
already gone through the process of mounting and balancing your
camera and your camera should be mounted and ready to go.
Your power source (battery or flight pack from your multirotor)
should be hooked up.
It is preferred to power the Silk while stationary on the stand,
however you can power the gimbal on while holding it too.
To power on, simply switch the rocker switch to the on position. The
LED on the rocker switch will illuminate indicating that it is in the ON
position:
